TP10S Twisted Axis CNC Press Brake Machine

TP10S hydraulic bending machine accessories adopt TP10S CNC system, which has high labor productivity and high precision in plate bending work. This machine uses upper and lower molds of different shapes, with the best parameter ratio and core material configuration. It has stable performance, more convenient operation, and can bend workpieces of various complex shapes. Compared with traditional bending machines, hydraulic bending machines have better bending accuracy and efficiency, and can increase bending time by 30%.

• The slider can bend the plate into shape in one go, and after multiple bends, workpieces with more complex shapes can be obtained.
• When equipped with corresponding equipment, it can also be used for punching holes.

SHEET METAL BENDING SAMPLES

Bending machines can bend a variety of metal materials such as stainless steel, iron, copper, aluminum, titanium and carbon steel. As small as non-ferrous metals, ferrous metal sheets, automobiles and ships, electrical appliances, decoration, kitchen utensils, cabinets, elevator cabinet doors, cutting and bending processing; as large as the aerospace field, CNC shearing machines and CNC bending machines are playing an increasingly important role.

1.The main features of the machine

1.1 The model is advanced and beautiful. The two oil cylinders are fixed on the left and right wall panels. The force state of the whole machine is reasonable and the rigidity is sufficient.

1.2 Good synchronous performance, strong anti-eccentric load capability, and easy debugging.

1.3 It has the best parameter ratio and core material configuration, stable performance, more convenient operation, and can bend workpieces of various complex shapes.

1.4 Compared with the traditional bending machine, the hydraulic bending machine has better bending accuracy and efficiency and can increase the bending time by 30%.

2.The main components and structure of the machine

2.1. TP10S CNC system：

2.1.1 The TP10S controller system includes 2 servo motors, a set of handles, a screen, a Schneider electric box, and a foot switch set, with economical and easy-to-use CNC high-level performance.

2.1.2 The efficient algorithm optimizes the bending cycle, reduces the setting time of working steps, and improves the overall efficiency of the bending process, especially in batch processing scenarios.

2.1.3 Strong anti-interference ability, high reliability, and high accuracy. Accommodates 2D and 3D graphics editing.

2.2. Electrical Parts：

2.2.1 The equipment adopts Schneider components imported from France, which are famous for their stability, durability, and long service life.

2.2.2 The machine is equipped with Eston’s original self-adaptive electrical box assembly, which has strong anti-interference ability and stable electrical performance.

2.3. Backgauge：

2.3.1 To ensure the excellent motion accuracy of the X-axis, imported ball screws and linear guides are used to replace the traditional screw rods, which improves the accuracy and consistency of our manufacturing process.

2.3.2 The rear stop uses a synchronous pulley mechanism controlled by a servo motor instead of a stepper motor. This upgrade provides greater control and accuracy to our operations.

2.3.3 The entire back gauge system is tempered at high temperatures to eliminate internal stress, enhance metal plasticity and toughness, and prevent loss of precision caused by frame deformation.

2.4 German OKDO IPM series：

2.4.1 With axial and radial pressure compensation design, it can maintain high volumetric efficiency even at low speed and low viscosity.

2.4.2 Ultra-low noise, using high-strength cast iron and unique internal muffler design, making the noise even lower.

2.4.3 Extremely low flow and pressure pulsation, and can maintain stable flow and pressure output even at low speeds.

3.Main technical parameters

4.Working environment and conditions of use

This machine is suitable for any material preparation workshop, and its conditions are:

1. Ambient temperature: -10～+40℃ (the temperature of the fuel tank shall not be lower than +10℃)
2. Relative humidity: ≤80% (+25℃)
3. Power source: 3phase 380V±10% 50Hz（or customized）

This machine has no “three wastes” discharged, and the noise limit meets the requirements of JB9969-1999.

5.Installation, test, acceptance and after service

5.1.Seller should inform the buyer to inspect the machine in our factory after the machine is finished.

5.2.Seller should supply corresponding files and foundation drawings in 7 days after confirming the order.

5.3.If buyer needs the installation, test by seller, then the charges in China will be taken by seller. And charges out of China, such as tickets, and hotels, should be taken by the buyer.

MAMTECHNIC Sheet Metal Roll Forming Machine With Hydraulic Uncoiler

PB-300T/3200 Electro Hydraulic Servo CNC Plate Press Brake Bending Machine

Economical Twisted Axis CNC Press Brake Machine

TP10S Twisted Axis CNC Press Brake Machine

CNC Automatic Channel Letter Bending Machine For Advertising

11NC-6*3200 Plate Cutting Shears For Sheet Metal

125T/3200mm ESA 630 CNC Press Brake Machine

80T2000mm CNC Press Brake Machine

125T/3200 Hydraulic Press Brake bending machine

Hydraulic Press Brake Bending Machine