What if the Fiber Laser CNC Cutting Machine Can’t Cut through The Product?

When operating fiber laser cnc cutting machines, Sometimes, the effect of cutting is often not deep. This not only wastes the operator’s time and money. Let’s analyze the reasons and solutions for this situation together.

The power of the laser will gradually decrease after a long time of use. Finally, this will lead to a decline in cutting ability and lead to incomplete cutting.

There is a limited cutting thickness for fiber laser cnc cutting machines with different power. If the object exceeds the limit thickness, the cutting effect of the equipment will be poor.

Optical elements include a focusing mirror, a reflecting mirror, etc. Because of the long-term poor working environment, it is easy to leave residue on the surface of such lenses. This reduces the laser power of the equipment, resulting in imperfect cutting effect.

If the cutting speed is too fast, the situation of missing cutting will inevitably occur, which will lead to the situation of incomplete cutting.

When cutting, the auxiliary gas blows off the residue. When the air pressure is not reached, it is difficult to remove the residue. Therefore, this leads to the situation that the cutting is not thorough.

If the cutting effect is not deep enough because of power, we should replace the laser tube in time. For example, we can use a smoother and larger regulator to increase the laser current output and improve the output power.

If the cutting speed is too fast, the cutting depth will be too shallow. MAMTECHNIC suggests that the speed should be adjusted to match the power and speed.

If the lens is dirty, it is necessary to clean the lens. If the lens has been damaged, please replace it. Besides, we should tighten the screws in time.