An Article About the Common Problems And Solutions of Tube Cutting Laser Machine

tube cutting laser machine has the characteristics of fast working efficiency and convenient use. Therefore, many companies in the pipe production industry love it. But the machine may fail frequently for some reasons. For example, the use time is too long, the data information is set incorrectly, and the daily maintenance is negligent.

1. The common reason is that the model and specification of the laser nozzle are inconsistent with the thickness of the pipe. The operator must remove the laser nozzle and replace it.
2. It is also possible that the cutting speed set by the laser tube cutting machine is too fast. Therefore, the angular velocity of the machine must be reduced.

1. First of all, we need to check whether the focus of the laser is wrong and adjust it in time before application.
2. Secondly, this problem may be caused by the insufficient power of the laser tube cutting machine. The circuit should be checked in time for damage.

1. If an action is missing automatically, please stop first and switch to manual mode to open this action. If the pipe cutter still does not respond, the output relay may be damaged.
2. Manually open the action, observe the relay indicator light, and confirm the corresponding relay of the action. Then unplug it to replace it. If the action is normal, it is a common output relay loss.

The above is the common problems and solutions of tube cutting laser machine. When using the cutting workpiece, we need to adjust the cutting parameters of the laser tube cutting machine according to the actual situation of the cutting workpiece. In this way, the laser pipe cutting machine can achieve the required cutting effect and work efficiency!

MAMTECHNIC is a laser equipment company integrating production, processing, and sales. We provide customers with advanced products and advanced technical support. If you are interested in our products, please contact us.